You've never seen a Magnetic Locator like the XT, and once you use it, you'll never use another. When we asked our most demanding customers what they look for in a Magnetic Locator, they told us:

               •  Accuracy        • Reliability      • Ease of Use

Fifteen months of research, design, and testing has produced the new Schonstedt XT, the most portable Magnetic Locator ever made.

One hand operation makes finding faster, providing both audio and visual (XTd model) indication of ferrous objects up to 16 feet underground. And the new XT follows the Schonstedt tradition of ruggedness and reliability. So go ahead, make your move to the new Schonstedt GA-92XT.
 

Two models to choose from:

Dual Frequency Cable and Line Tracing Modes
The MAC-51Bx simultaneously transmits 82.5 kHz (HF) and 571 Hz (LF) signals. This feature lets you select and compare received audio signals from both frequencies along with magnetic information without having to return to the transmitter.

Transmitter Conductive Mode
If an exposed section of a target gas or water pipe is accessible, conductive coupling is the most reliable method for applying the trace signal. This mode has to be used to apply both HF and LF frequencies so that you can use all three features on-the-fly. Providing a good electrical contact between the clip and the conductive portion of the target line by removing rust or paint before attaching the clip is very important.

Transmitter Inductive Mode (HF only)
Induction is achieved by placing the transmitter over the target cable/pipe or by using the optional Inductive Signal Clamp. It's the easiest and quickest way to applying a trace signal that is strong enough for tracing most lines. The trace signal generates an alternating magnetic field around the cable which induces a signal into the receiver's cable sensor. A sharp null in the audio signal between the two peaks occurs when the receiver's tip is directly over the cable.

Magnetic Locating Mode
Only the MAC-51Bx receiver is required when operating in the magnetic mode. Just set the Mode switch to MAG, the Gain control to mid-range, and you're ready to locate underground ferrous pipes, water meters, water valves, and property markers - or anything that has a magnetic field including the 50/60Hz electro-magnetic field generated by energized power lines.

Optional Mini-Transmitter To Trace Non-Metallic Pipes

Expands Locating/Tracing Capability
The MT-2 (Sonde) is a miniature transmitter designed to be used in conjunction with the MAC-51Bx Receiver. It’s just what you need to trace non-metallic pipes, pinpoint obstructions, locate concrete septic tanks, and monitor the course of utility tunneling under highways. As the sonde, attached to the end of a sewer/ drain cleaning snake, is pushed through a non-metallic pipe, it emits a strong signal that you can detect and trace at depths up to 18 feet using the MAC-51Bx receiver set to the HI mode.

Very easy to Attach
The sonde has one concave surface so it can be secured to a plumber’s snake with electrical tape.