The GPR
range of prisms are supplied with a
holder and target plate. The GPR121
Professional version is manufactured
from quality metal components, for
accuracy and long life.
Holder and housing of aluminium
Removable prism w/ special copper
coating for ATR
For
exact TPS measurements, prism
surface accuracy 2" Range 3000m with
TPS1100 under average conditions
For
all total stations and attachable
EDMs
Prism centre in the tilting axis and
in the vertical axis (correct Hz-and
V angle measurements even when prism
is not aligned)
Fits to all Leica Geosystems
reflector carriers and reflector
poles
Coated circular prism for best
reflection and range
Stock #
641617
For measurements over long distances
or under poor atmospheric conditions. Inclinable prism
holder with prism centre in the tilting axis and the
vertical axis. Also usable with only two prisms or with a
circular prism.
Stock #
400080
GRZ4, 360° Prism
GRZ101, 360° Mini prism
For efficient operation without the
need for directing the prism toward the instrument,
a 360° type prism is recommended. This consists of
six individual prisms joined together. The
arrangement allows the measuring beam to reflect
directly back to its source evenly from any position
on the prism set. The even distribution of the
prisms provides similar offset and accuracy readings
from any side.
This prism is recommended for all robotic work where
the prism is mounted on a reflector pole. The rubber
mountings on the top and bottom of the prism provide
protection if the pole falls over. The prism is
supplied in a padded case for safe transportation.
The GRZ4 has an overall pointing accuracy of 5mm.
However, when aiming directly at one of the six
prisms, an accuracy of better than 2mm can be
achieved. Yellow arrows, appropriately placed on the
rubber cap, allow easy control of manual aiming by
sight.
Stock #
639985
Due to its small size, this low cost
alternative provides the greatest pointing accuracy of 1.5mm.
However, it has restricted functionality with the TPS Power Search,
and a shorter measuring and ATR range, than the standard size
prisms. The GRZ101 is supplied with a four-part reflector pole, two
pole tips and a level bubble.
Stock #
664327
Leica GPR111, Economical All-in-one Prism
Leica GMP101 Mini
Prism Set
The GPR
range of prisms are supplied with a
holder and target plate. The GPR111, a
low-cost Basic prism is moulded into a
plastic holder and target plate.
For routine work,
particularly on the building site
Attractive price
/ performance ratio
Range 2000m with
TPS300 under average conditions
Holder and
housing of red polymer, fibre-reinforced
For all total
stations and attachable EDMs
Prism centre in
the tilting axis and in the vertical
axis (correct Hz-and V angle
measurements even when prism is not
aligned)
Fits to all Leica
Geosystems reflector carriers and
reflector poles
Coated circular
prism for best reflection and range
Stock #
641618
Conveniently
storable in the instrument container, Mini
Prisms offer a high positional accuracy due
to their small size. The GMP101 has a
built-in levelling bubble and supplied with
an attachable spike. With this arrangement a
point can be measured with very high
precision.
