|
 |
|
Heavy-Duty Rhinotek™ Bag for 36-Inch Lath |
Heavy-Duty Rhinotek™ Bag
for 48-inch Lath |
|
 |
The #8100-20-ORG is the same as the
popular SECO #8100-00 Lath Bag with the addition of
abrasion-resistant Rhinotek™ material.
The bottom of the bag and 6 inches up the side is
constructed of 100% Rhinotek™.
The bag holds 36-inch (91.44-cm) lath, and features a
sturdy, adjustable shoulder strap and hand loop to carry
the load.
It also features three, 8 x 10-inch (20.32 x 25.40-cm),
pleated outside pockets for paint, markers, etc.
Inside dimension: 8 x 33 inches (20.32 x 83.82 cm
|
|
|
|
The #8101-20-ORG is the same as the SECO
#8100-20-ORG Lath Bag with abrasion-resistant Rhinotek™
material, but holds 48-inch lath.
The bottom of the bag and 6 inches up the side is constructed of
100% Rhinotek™.
The bag holds 48-inch (104.14 cm) lath, and features a sturdy,
adjustable shoulder strap and hand loop to carry the load.
It also features three, 8 x 10-inch (20.32 x 25.40-cm), pleated
outside pockets for paint, markers, etc.
Inside dimension: 8 x 45 inches (20.32 x 114.3 cm).
|
|
|
|
18" Stake Bag |
18" Stakes and Hubs Bag |
 |
This SECO stake bag features outside
pockets for holding tools and supplies and an adjustable
shoulder strap.
There are brass grommet drain holes at both ends.
This stake bag is used to hold 18-inch wood survey
stakes and/or iron rebar.
The dimensions are: 19 x 8 x 12 in (48.3 x 20.3 x 30.4
cm)
Weighs 0.78 lb (0.35 kg)
|
|
 |
This
SECO stake bag features outside pockets for holding tools and
supplies and an adjustable shoulder strap.
There are brass grommet drain holes at both ends.
This stake bag is used to carry 18-inch wood survey stakes. A
convenient partition down the middle of the bag separates
stakes and hubs.
The dimensions are: 19 x 8 x 12 in (48.3 x 20.3 x 30.4 cm)
Weighs 0.88 lb (0.40 kg)
|
|
|
|
Heavy-Duty Rhinotek™ Bag for 24-Inch
Stakes |
Heavy-Duty Rhinotek™ Bag for 24-Inch Stakes w/Center
Divider |
|
|
This SECO stake bag is similar to the
popular #8090-00-XXX in every way but one. This new bag
is built with super-tough Rhinotek™.
The main compartment is constructed of Rhinotek™ and the
five large outer pockets are 1000 denier Cordura®, so
you know this bag is built to last.
The bag holds 24-inch (60.96 cm) stakes or rebar.
Other features include: a hammer loop; an adjustable
shoulder strap; brass grommet drain holes at both ends
of the bag
|
|
|
 |
This SECO stake bag
is the same as the #8092-20-ORG but features a center divider.
This new bag is built with super-tough Rhinotek™.
The main compartment is constructed of Rhinotek™ and the five
large outer pockets are 1000 denier Cordura®, so you know this
bag is built to last.
The bag holds 24-inch (60.96 cm) stakes or rebar.
Other features include: a hammer loop; an adjustable shoulder
strap; brass grommet drain holes at both ends of the bag.
|
|
|
|
Wire Stake Bag for Carrying 21-inch
(53-cm) Wire Stake Flags |
Wire Stake Bag for Carrying 30-inch (76 cm) Wire
Stake Flags |
|
 |
Here's a convenient bag for carrying
21-inch (53-cm) wire stake flags.
Weighs 0.22 lb (0.10 kg)
|
|
|
|
A convenient bag for carrying
30-inch (76-cm) wire stake flags.
Weighs 0.28 lb (0.13 kg)
|
|
|
|
Heavy-Duty Lath Carrier |
Bag for Carrying 48-inch (1.2-m) Lath |
|
 |
This new SECO carrier can hold up to 50
lath. It can handle rebar too!
This 1000 denier Cordura™™ bag has a thick, reinforced
bottom of leather and the advanced Rhinotek
abrasive-resistant material.
The exterior features a hammer loop, paint can holder,
marker pen slots, and a pocket for miscellaneous gear.
Weighs 0.22 lb (0.10 kg)
|
|
|
 |
Holds 48-inch (1.2-m)
wood lath. Has a hand loop, a shoulder strap, and an outside
pocket. It's eight inches in diameter.
Weighs 1 lb (0.45 kg)
|
|
|
|
|
|
|
