New Page 1

5503-30 Wild Leica-Style Prism Pole

5507-5527-Series Quick Change™ TLV™ Prism Poles

This pole is graduated for GPH1-type prisms. It features a wild Leica-style tip and twist locking. It extends to 15.25 ft (4.65 m), collapses to 5.41 ft (1.65 m).

Weighs 7.6 lb (3.45 kg)

Stock # 5503-30

This pole is designed to be compatible with all targets, prisms, and GPS antennas. By using the correct SECO #2090-XX adapter —to achieve a target height of 150 mm— this or any of the poles in the 'Quick Change' series is used for GPS, robotic or total station surveys.

The 'Quick Change' pole system features:
• SECO TLV™ locking (TLV™ has 40-minute vial built in)
• Aluminum or carbon fiber outer pole (see below)
• Metric or dual graduation inner pole (see below)
• Available with or without locking pin (see below)

This pole system is simple to use. To determine correct adapter, subtract 155 mm from your target height to find correct adapter length.
Available as a carbon fiber or aluminum pole (see below).

Stock #	Grads:	Length:	Outer
5507-10	Dual	4.2 - 7.2 ft	Aluminum
5507-11	Dual	1.6 - 2.4 ft	Aluminum
5507-13	Dual	4.2 - 7.2 ft	Carbon Fiber
5507-15	Dual	5.0 - 8.4 ft	Aluminum
5507-16	Dual	5.0 - 8.4 ft	Carbon Fiber
5507-17	Dual	5.0 - 8.4 ft	Carbon Fiber
5507-20	Dual	5.2 - 11.8 ft	Aluminum
5507-22	Dual	5.2 - 11.8 ft	Carbon Fiber
5507-30	Dual	5.4 - 15.2 ft	Aluminum
5527-10	Metric	1.3 - to 2.2 m	Aluminum
5527-11	Metric	0.5 - 0.75 m	Aluminum
5527-13	Metric	1.3 - 2.2 m	Carbon Fiber
5527-15	Metric	1.5 - 2.6 m	Aluminum
5527-16	Metric	1.5 - 2.6 m	Carbon Fiber
5527-17	Metric	1.5 - 2.6 m	Carbon Fiber
5527-20	Metric	1.5 - 3.6 m	Aluminum
5527-22	Metric	1.5 - 3.6 m	Carbon Fiber
5527-30	Metric	1.65 - 4.6 m	Aluminum

Adjustable Tip, Dual Grad. 12-Foot (3.65 m) QuickRelease™ Prism Pole
Adjustable Tip, Dual Grad. 15.6-Foot (4.7 m) TLV™ Prism Pole

This pole features the Quick Release™ locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual graduations on the inner pole.

Weighs 5.1 lb (2.31 kg)

Stock # 5700-20

This pole features the TLV™ locking mechanism. It's constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip. It's finished with electrostatic powder paint coating on the outer pole and permanent silk-screened dual graduations on the inner pole.

Weighs 7.6 lb (3.45 kg)

Stock #

5500-30

Specialty Pole: 5500-23 Mini TLV™ Prism Pole - 4.8 ft (1.5 m) 5503-30 Wild Leica-Style Prism Pole

This pole features dual grads, adjustable tip and TLV™ lock. It extends to 5.10 ft (1.55 m), collapses to 2.70 ft (0.82 m)

Weighs 2.3 lb (1.04 kg)

Stock # 500-23-RED

This pole is graduated for GPH1-type prisms. It features a wild Leica-style tip and twist locking. It extends to 15.25 ft (4.65 m), collapses to 5.41 ft (1.65 m).

Weighs 7.6 lb (3.45 kg)

Stock # 5503-30

2.6-Meter Gold Kevlar® Telescopic Prism Pole European Style Compact & Portable Prism Pole System

The tubes in this 2.6-meter pole are made of Kevlar®, the high-tech material that is known for its high tensile strength and low weight.

Kevlar® tubes are non-conductive, which makes this pole ideal for surveying in areas where there may be a danger of low-hanging electrical wires.

The SECO Gold Kevlar poles and rods are the same light weight as our popular carbon fiber products.

All fittings are machine-anodized aluminum.

The two-piece point has a removable hardened point.

Kevlar® is a proven material and is battle-ready for all surveying conditions.

KEVLAR® is a registered trademark of the DuPont Corporation.

Stock # 5527-15K

This new and improved system is ideal for all handheld prism work, topos or precise layout work.
This system can be assembled in various pole-length configurations.
For the first time ever, this system is available with the most accurate prism offset position; a -17.5-mm offset prism that places the optical center of the prism over the plumb line axis. This offset eliminates angular pointing errors at short sights.
All aluminum parts are anodized red, clear, or blue to maintain machining accuracy.
All sections machined lengths are known (30 cm) , so prism height can easily be calculated.
The built-in 40-min vial on the prism assembly can be moved to top or bottom of the yoke.
The white sight cones provide improved vertical angle pointing.
This system comes with an adapter so that the prism assembly can be used with a standard 5/8-11 (male-threaded) prism poles, achieving prism height of 115-mm.
Orange carrying case - made of Cordura® - is included.
Weighs 1.6 lb (0.73 kg)

Stock # 5910-01